| 核压力容器材料国产化的可行性评述 |
| |
| 引用本文： | 冯德诚.核压力容器材料国产化的可行性评述[J].核动力工程,1989,10(3):7-12. |
| |
| 作者姓名： | 冯德诚 |
| |
| 作者单位： | 西南反应堆工程研究设计院 成都 |
| |
| 摘 要： | 文中扼要介绍了我国首次生产的 RPV 用 A508-3钢锻件的工艺和性能。通过对生产经验、试验研究、国内外文献和国内现有及新添设备的分析给出:实现600MW 核电站压力容器国产化在实际上具备了可行性和现实性。
|
| 关 键 词： | 压力容器 核电站 国产化 材料 |
Possibility Evaluation on Nationalization of Materials for RPV |
| |
| Feng Decheng.Possibility Evaluation on Nationalization of Materials for RPV[J].Nuclear Power Engineering,1989,10(3):7-12. |
| |
| Authors: | Feng Decheng |
| |
| Abstract: | This paper briefly describes the technology and properties of A508-3 steel forgings for reactor pressure vcssel,which is first produced in China.Through analysis for production experience,test research,internal current and new adding equipments,it is shown that to realize nationalization of reactor pres-sure vessel in 600 MW nuclear power plant is not only extra necessary,but also in practice possible and feasible. |
| |
| Keywords: | Reactor pressure vessel Nationalization Possibility |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
