| 电磁阀本体黑色磷化工艺 |
| |
| 引用本文： | 唐春华,唐彬.电磁阀本体黑色磷化工艺[J].电镀与涂饰,2006,25(7):21-22. |
| |
| 作者姓名： | 唐春华 唐彬 |
| |
| 作者单位： | 福建泉州市创达金属表面处理公司,福建,泉州,362000;福建泉州市创达金属表面处理公司,福建,泉州,362000 |
| |
| 摘 要： | 分析了电磁阀本体黑色磷化工艺存在的问题,包括磷化质量不稳定,工艺不完善,挂具设计不合理、后处理质量低等。针对上述问题,提出了改进的方法,如增加一道预脱脂工序,强化表调效果,采用二次磷化法,提高防锈油防锈性,改制挂具等。改进后的工艺,磷化质量优良,磷化工艺稳定,工艺管理规范。
|
| 关 键 词： | 电磁阀 磷化 工艺改进 |
| 文章编号： | 1004-227X（2006）07-0021-02 |
| 收稿时间： | 2006-01-06 |
| 修稿时间： | 2006-01-06 |
Process of black phosphating of solenoid valve |
| |
| TANG Chun-hua,TANG Bin.Process of black phosphating of solenoid valve[J].Electroplating & Finishing,2006,25(7):21-22. |
| |
| Authors: | TANG Chun-hua TANG Bin |
| |
| Affiliation: | Box 602, 3th Floor, 5# of Zhan-qian Donglu, Pingxiang 337000, China |
| |
| Abstract: | The existing problems of black phosphating process for solenoid valve were analyzed,including unstable phosphating quality,imperfect technics,incongruous rack design and low post-treatment quality.According to the above problems,the improved methods were pointed out,such as adding a pre-degreasing process,strengthening surface regulating effect,using two times phosphating,increasing rust resistance and improving rack design.The improved process produces stable phosphating with good quality and standardized management. |
| |
| Keywords: | solenoid valve phosphating improved process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
