| 再造烟叶生产线液料与粉料掺配系统的改进 |
| |
| 引用本文： | 吴克志,苗俊初,张春梅. 再造烟叶生产线液料与粉料掺配系统的改进[J]. 烟草科技, 2008, 0(12) |
| |
| 作者姓名： | 吴克志 苗俊初 张春梅 |
| |
| 作者单位： | 1. 山东中烟工业公司青岛卷烟厂,山东省青岛市崂山区株洲路137号,266000
2. 开封东方机械有限公司,河南省开封市通许县文卫路东段22号,475400 |
| |
| 摘 要： | 再造烟叶生产线液料与粉料掺配系统的液料电子秤部分,由于原设计采用垂直螺旋形式,液料料斗密封困难,经常出现漏料现象,液料、粉料掺配比例误差较大,造成混合后含水率不稳定。为此,将原来的立式螺旋密封输送机构改为水平螺旋密封输送机构,彻底解决了漏料现象,混合后液料、粉料掺配精度偏差由1%提高到0.5%。
|
| 关 键 词： | 再造烟叶生产线 液料 粉料 掺配 立式螺旋 水平螺旋 |
Improvement of liquid and powder blending system in reconstituted tobacco sheet processing line |
| |
| WU KE-ZHI,MIAO JUN-CHU,ZHANG CHUN-MEI. Improvement of liquid and powder blending system in reconstituted tobacco sheet processing line[J]. Tobacco Science & Technology, 2008, 0(12) |
| |
| Authors: | WU KE-ZHI MIAO JUN-CHU ZHANG CHUN-MEI |
| |
| Abstract: | The electronic liquid material weighing unit in liquid and powder blending system in the conventional reconstituted tobacco sheet processing line adopted a vertical screw,where the liquid material hopper is hard to be tightly sealed,and liquid leak resulted in moisture content fluctuation after blending. The liquid leak was completely avoided by replacing the vertical screw with a horizontal one,the blending precision deviation reduced from 1% to 0.5%. |
| |
| Keywords: | Reconstituted tobacco sheet processing line Liquid material Powder material Blending Vertical screw Horizontal screw |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
