首页 | 本学科首页   官方微博 | 高级检索  
     

新型防喷器内表面声发射模拟源
引用本文:朱祥军. 新型防喷器内表面声发射模拟源[J]. 无损检测, 2011, 0(5): 28-31
作者姓名:朱祥军
作者单位:川庆钻探工程公司安全环保质量检验监督研究院;
摘    要:为了解防喷器内表面声发射信号的特征及传播特性,需要进行内表面的模拟试验,但常用的模拟源不能满足试验要求。为此研制出新型的模拟信号源装置,该装置使用方便、防水、密封、可控,可产生持续、稳定信号。通过对比分析,新型模拟源产生信号幅度的平均值与铅笔芯模拟源的平均值基本一样;新型模拟源的最高幅度略比铅笔芯模拟源高;新型模拟源的平面定位偏离实际位置的距离比铅笔芯模拟定位的要小,且在同一位置上各次试验定位数值间的离散度也小。从而验证了新型模拟源信号可以满足实验室研究的需要。

关 键 词:声发射检测  防喷器  内表面  模拟源

The Research on New Source of AE on Bop Inner Surface
ZHU Xiang-Jun. The Research on New Source of AE on Bop Inner Surface[J]. Nondestructive Testing, 2011, 0(5): 28-31
Authors:ZHU Xiang-Jun
Affiliation:ZHU Xiang-Jun (Safety Environment Quality Surveillance and Inspection Research Institute of CNPC Chuanqing Drilling & Exploration Corporation,Deyang 618300,China)
Abstract:In order to investigate the characteristics of AE signals and propagation on BOP inner surface,some simulation tests on inner surface were necessary,but the common analog sources could not meet the requirements. Aiming at this problem,a new type of analog signal source device was developed.Being easy to use,waterproofing, sealing and controllable,this device could produce sustained and stable signal.With comparing and analysis,it was concluded that the average amplitude of signal produced by new device sour...
Keywords:Acoustic emission testing  Bop  Inner surface  Simulation source  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号