| 三坐标测量机测量弧齿锥齿轮的方法与实例 |
| |
| 引用本文： | 孙学川,薄纯青,段建中.三坐标测量机测量弧齿锥齿轮的方法与实例[J].机械工程师,2014(5):23-26. |
| |
| 作者姓名： | 孙学川 薄纯青 段建中 |
| |
| 作者单位： | 宁夏大学机械工程学院; |
| |
| 摘 要： | 以格里森制弧齿锥齿轮为例介绍了三坐标测量机在弧齿锥齿轮误差测量中的应用.旨在探讨通用测量设备进行复杂齿轮测量的一般方法.该研究工作分为两部分：一是从国标GB11365-891]中规定的测量指标中选择若干测量项目,根据各项目之定义,确定正确的测量方法及算法,进行数据处理后给出测量结果;二是测量实际齿面与理论齿面之间的误差,方法是将齿面划分为网格,测量出网格交点处的数值并与齿面方程的理论值进行比较,文中对第一部分工作进行了介绍.
|
| 关 键 词： | 弧齿锥齿轮 三坐标测量机 坐标法 齿面误差 |
Method and Example of Measuring Spiral Bevel Gear with Coordinate Measuring Machine |
| |
| SUN Xuechuan,BO Chunqing,DUAN Jianzhong.Method and Example of Measuring Spiral Bevel Gear with Coordinate Measuring Machine[J].Mechanical Engineer,2014(5):23-26. |
| |
| Authors: | SUN Xuechuan BO Chunqing DUAN Jianzhong |
| |
| Affiliation: | (School of Mechanical Engineering, Ningxia University, Yinchuan 750021, China) |
| |
| Abstract: | The application of coordinate measuring machine in the error measurement of spiral bevel gear is given on the basis of Gleason spiral bevel gear. It aims to probe the common way of measuring the complex gear with general measuring equipment. The research contains two parts： the one is to select several measurement items from GBt 1365- 89, then work out the correct measurement way, and obtain the result of measurement after some data processing. The other one is to measure the error of actual tooth surface between with theory tooth surface. The part one is introduced in detail. |
| |
| Keywords: | spiral bevel gear coordinate measuring machine coordinate method tooth surface error |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
