| 数控车加工中螺纹倒角处毛刺的去除方法分析 |
| |
| 引用本文： | 张翔宇.数控车加工中螺纹倒角处毛刺的去除方法分析[J].机械工程师,2014(5):145-146. |
| |
| 作者姓名： | 张翔宇 |
| |
| 作者单位： | 天津职业技术师范大学; |
| |
| 摘 要： | 数控车加工螺纹过程中,在螺纹倒角处易产生毛刺,这与被加工工件的材质、刀具的材料、进刀策略等都有一定关系.文中通过案例分析,改变传统加工螺纹的工艺路线,达到了去除螺纹倒角处毛刺的目的,进而起到倒角的作用,也使得加工零件更美观.
|
| 关 键 词： | 数控车 加工 螺纹 毛刺 |
Analysis on the Deburring Method of Thread Chamfer in NC Lathe Machining |
| |
| ZHANG Xiangyu.Analysis on the Deburring Method of Thread Chamfer in NC Lathe Machining[J].Mechanical Engineer,2014(5):145-146. |
| |
| Authors: | ZHANG Xiangyu |
| |
| Affiliation: | ZHANG Xiangyu (Tianjin University of Technology and Education, Tianjin 300222, China) |
| |
| Abstract: | During the thread processing on NC lathe, burr will be generated on the thread ehamfer is influeneed by the workpieees material, tool material, feeding strategies. Through ease analysis, the traditional t processing route is ehanged to deburr the thread chamfer, thus the chamfer effect and the parts appearance improved. |
| |
| Keywords: | NC lathe processing thread burr |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
