Dynamic recrystallisation of D2 and W1 tool steels

Abstract

Hot torsion continuous tests were performed on a high carbon, high chromium cold work die steel (D2) and a water hardenable carbon tool steel (W1) at strain rates of 0·1, 1, and 4 s^-1 in the temperature ranges of 900 to 1150°C for D2 and 900 to 1200°C for W1. The stress–strain (σ–?) curves rose to a peak stress σ _p , then declined to a steady state value σ _ss , typical of dynamic recrystallisation (DRX). The commencement and effective completion (99%) of DRX are obtained from θ–σ and σ–? curves respectively where θ is the strain hardening rate dσ/d?. The kinetics of DRX are assumed to follow an Avrami equation whereas the time t _ss for 99% DRX is related to σ _ss and temperature by a sinh function. The equilibrium recrystallised grain size D _s decreases with increase in σ _ss and Z, the Zener–Hollomon temperature compensated strain rate. Due to the presence of carbides, which stimulate nucleation, D2 generally has faster DRX kinetics than W1.