Interfacial phenomena between fluxes for continuous casting and liquid stainless steel

Abstract

Casting powders melt on the surface of the liquid metal forming a liquid slag layer. Samples taken during casting revealed convective flows in the flux layer and mass exchange with the liquid metal. It is demonstrated that concentrations of certain elements are considerably higher at the phase boundary than in the bulk of the metal and slag phase. Disturbances of interfacial tension produced by mass and charge transfer evidently cause strong shearing forces which act in parallel with the phase boundary. These forces induce convective movements in the flow boundary layer. Convective flows next to the interface between two liquids have been studied in laboratory experiments using various liquids. The results show that the movement velocity of volume elements next to the interface (due to disturbances of interfacial tension) are dependent on liquid layer thickness and on liquid properties. A new dimensionless number describing this manner of convective flow and suitable for evaluation of experimental results is introduced. Its contribution to the total mass transfer will be shown. A dimensionless function describing the relation between convective flows in the slag layer and mass transport is theoretically developed. Coefficients of this function for Ti transfer into the flux layer have been determined empirically.