Effect of strain path on recrystallisation kinetics during hot rolling of Al–Mn

Abstract

Hot rolling of an aluminium–1% manganese alloy has been carried out. Wedge shaped specimens were rolled in two pass schedules, of either two forward passes or a forward and a reverse pass to the same overall net strain. Through thickness marker pins were inserted to allow the investigation of plastic flow during the different rolling schedules. The reversed rolling technique allowed the determination of the effect of a strain path change on the recrystallisation kinetics during hot rolling. Following subsequent annealing, quantitative metallography indicated that the forward–forward specimens showed faster recrystallisation kinetics than the forward–reverse specimens, and produced a finer recrystallised grain size following equivalent thermomechanical treatments differing only in strain path. A through thickness microstructural gradient was found in all materials.