Investigation of blunting line and evaluation of fracture toughness under mixed mode I/III loading in commercially pure titanium |
| |
Abstract: | AbstractThe blunting line and fracture toughness in commercially pure titanium under mode I and mixed mode I/III loading was studied. A modified compact tension geometry was used for determining the blunting line as well as mixed mode I/III fracture toughness. The results showed that the constraint factor m in the blunting line equation under mode I loading was 1.84. Also, there was no effect of notch root radius on the slope of the blunting line. The blunting line slope under mixed mode I/III loading was found to be lower than that under mode I loading and agreed with empirical correlations. The fracture toughness under mode I loading was found to be higher for specimens with larger notch root radius. However, notch root independent fracture toughness could be obtained from blunt notch specimen tests using stretch zone width measurements. The fracture toughness was found to decrease with increasing mode III loading. |
| |
Keywords: | |
|
|