Abstract: | AbstractThis paper is the first of a series of two describing online monitoring of the continuous casting machine and the abnormal transient phenomena observed. The present paper, Part 1, pays attention to assessment of the friction between the billet and mould based upon the cam rod force and the electric current intensity of the mould oscillation motor. Information relating to casting parameters before 58 breakouts has been obtained with a monitoring computing program. Almost 40% of the breakouts could have been forecast through assessment of the billet-mould friction force before the breakouts. Transient phenomena in the withdrawal machine have been detected. The jerking of the strand is related to high billet-mould friction; however, other parameters such as the billet cutoff unit and roller bed design also have some effects on this transient phenomenon. Some mechanisms influencing the jerking of the strand are proposed. |