| 汽车后把手塑件的模流分析及注射模设计 |
| |
| 引用本文： | 陆宝山,王春香. 汽车后把手塑件的模流分析及注射模设计[J]. 模具工业, 2011, 0(12): 13-17 |
| |
| 作者姓名： | 陆宝山 王春香 |
| |
| 作者单位： | 苏州工业职业技术学院;江南嘉捷电梯股份有限公司; |
| |
| 摘 要： | 以汽车后把手塑件为研究对象,运用Moldflow软件分析了汽车后把手塑件的最佳浇口位置和冷却方式,同时对模具成型的塑件质量,如翘曲变形、熔接痕等进行了模拟,预测了模具设计中潜在的缺陷。基于模流分析的结果,合理设计注射模结构,提高设计水平。实践表明,设计出的模具结构紧凑、工作可靠、运行平稳、塑件精度高,取得了良好的经济效益。
|
| 关 键 词： | 汽车后把手塑件 模流分析 模具设计 |
Mold flow analysis and design of injection mould for automotive plastic part |
| |
| LU Bao-shan,WANG Chun-xiang. Mold flow analysis and design of injection mould for automotive plastic part[J]. Die & Mould Industry, 2011, 0(12): 13-17 |
| |
| Authors: | LU Bao-shan WANG Chun-xiang |
| |
| Affiliation: | LU Bao-shan1,WANG Chun-xiang2(1.Suzhou Institute of Industrial Technology,Suzhou,Jiangsu 215104,China,2.SJEC Corporation,Jiangsu 215122,China) |
| |
| Abstract: | The Moldflow software was used to analyze the optimum gate location and cool ing method for molding an automotive plastic part.The forming process of mould was sim ulated and potential defects such as warping deformation and weld line were predicted.An injection mould was optimized based on the result of mold flow analysis. |
| |
| Keywords: | automotive plastic part mold flow analysis mould design |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
