| 汽车保险杠注射模斜顶块设计 |
| |
| 引用本文： | 鄢志军. 汽车保险杠注射模斜顶块设计[J]. 模具工业, 2011, 37(11): 56-59 |
| |
| 作者姓名： | 鄢志军 |
| |
| 作者单位： | 延锋伟世通汽车模具有限公司,上海,201206 |
| |
| 摘 要： | 介绍了某汽车保险杠注射模的斜顶块结构,利用UG软件中的Motion对所设计的弯形方导杆结构进行运动分析和优化,解决了运动过程中斜顶块和动模型腔板干涉问题,最终得到了合理的模具结构,减少了试模、修模次数,缩短了模具的交货期,降低了成本。
|
| 关 键 词： | 保险杠 斜顶块 UG 注射模 |
Structure of angle ejecting block in injection mould for car bumper |
| |
| YAN Zhi-jun. Structure of angle ejecting block in injection mould for car bumper[J]. Die & Mould Industry, 2011, 37(11): 56-59 |
| |
| Authors: | YAN Zhi-jun |
| |
| Affiliation: | YAN Zhi-jun(Yanfeng Visteon Automotive Automotive Tooling Co.,Ltd,Shanghai 201206,China) |
| |
| Abstract: | An injection mould was designed for a car bumper in which angle ejecting block and square guide bar were applied.Then the UG software was used to analyze and opti mize the moving process of the square guide bar and the jamming problem was solved. |
| |
| Keywords: | bumper angle ejecting block UG injection mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
