| 汽车JK把手注射模设计制造 |
| |
| 引用本文： | 张汝英,杨军.汽车JK把手注射模设计制造[J].模具工业,2011,37(10):58-61,65. |
| |
| 作者姓名： | 张汝英 杨军 |
| |
| 作者单位： | 1. 三一重工股份有限公司,湖南长沙,410100
2. 湖南工业职业技术学院,湖南长沙,410208 |
| |
| 摘 要： | 分析了汽车JK把手塑件的结构及成型工艺,详细阐述了注射模结构及其主要成型零件的设计制造方法,介绍了注射成型工艺要点。实践证明,模具结构合理,运行平稳,塑件质量和生产效率达到了预期要求。
|
| 关 键 词： | 汽车JK把手 注射模 结构 工艺 |
Design and manufacture of injection mould for car JK handle |
| |
| ZHANG Ru-ying,YANG Jun.Design and manufacture of injection mould for car JK handle[J].Die & Mould Industry,2011,37(10):58-61,65. |
| |
| Authors: | ZHANG Ru-ying YANG Jun |
| |
| Affiliation: | ZHANG Ru-ying1,YANG Jun2(1.Sany Heavy Industries Co.,Ltd,Changsha,Hunan 410100,China,2.Hunan Industry Polytechnic,Hunan 410208,China) |
| |
| Abstract: | The structure and molding technique of a car JK handle were analyzed;and the design and manufacturing method of an injection mould structure and its main forming components were stated in detail.The key injection molding process was presented. |
| |
| Keywords: | car JK handle injection mould structure process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
