| 碳化硅多孔陶瓷支撑体表面涂层研究 |
| |
| 引用本文： | 刘有智,谷磊,申红艳,石国亮,刘振河.碳化硅多孔陶瓷支撑体表面涂层研究[J].膜科学与技术,2007,27(5):51-55. |
| |
| 作者姓名： | 刘有智 谷磊 申红艳 石国亮 刘振河 |
| |
| 作者单位： | 中北大学,化学工程技术研究中心,太原,030051 |
| |
| 摘 要： | 采用悬浮粒子浸浆法对碳化硅多孔陶瓷支撑体表面进行氧化铝涂层研究,探讨了支撑体的孔径、表面粗糙度以及支撑体与膜的匹配性对涂层完整性的影响;考察了涂层前后对气体渗透通量的影响.用SEM分别观察了涂层的表面和断面形貌.结果表明,支撑体孔径分布窄、孔径与悬浮粒子大小相匹配,支撑体表面平整光洁,且与膜的性质匹配时,可获得完整无开裂的涂层.
|
| 关 键 词： | 多孔陶瓷支撑体 浸浆法 表面粗糙度 |
| 文章编号： | 1007-8924（2007）05-0051-05 |
| 修稿时间： | 2006-04-07 |
Study on coating for silicon carbide porous ceramic support |
| |
| LIU Youzhi,GU Lei,SHEN Hongyan,SHI Guoliang,LIU Zhenhe.Study on coating for silicon carbide porous ceramic support[J].Membrane Science and Technology,2007,27(5):51-55. |
| |
| Authors: | LIU Youzhi GU Lei SHEN Hongyan SHI Guoliang LIU Zhenhe |
| |
| Affiliation: | Chemical Engineering Research Center, North University of China, Taiyuan 030051, China |
| |
| Abstract: | The alumina coating on silicon carbide porous ceramic support surface by a dip-coating method was studied.The integrity of coating influenced by the pore size,surface roughness of support surface and the matching between support and membranes was discussed.The influence of coating on gas permeation flux was investigated.The surface and cross-section were observed by SEM.The results showed that an integral crack-free coating could be achieved when the pore size distribution of support was narrow and matched the size of suspended particles,the surface of support was smooth and the properties of the support and the membrane were inconsistent. |
| |
| Keywords: | porous ceramic support dip-coating surface roughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
