| 深筒骨架形零件压铸模具优化设计 |
| |
| 引用本文： | 杨兵兵,屈雪丽.深筒骨架形零件压铸模具优化设计[J].铸造技术,2011,32(9). |
| |
| 作者姓名： | 杨兵兵 屈雪丽 |
| |
| 作者单位： | 1. 陕西工业职业技术学院,陕西咸阳,712000
2. 西北工业集团,陕西西安,710043 |
| |
| 摘 要： | 某深筒骨架形零件采用传统环形浇口设计的压铸模具,在实际生产中验证了其不足.本文通过对原有模具结构及金属液在充填过程中金属流态的分析,进一步确定了浇注系统的开设方式,并重新优化了模具设计方案,提高了零件的良品率.
|
| 关 键 词： | 深筒骨架形零件 压力铸造 环形浇口 扩散式侧浇口 |
Die-casting Mould Optimization Design on the Parts with Deep-cylinder and Frame-type |
| |
| YANG Bing-bing,QU Xue-li.Die-casting Mould Optimization Design on the Parts with Deep-cylinder and Frame-type[J].Foundry Technology,2011,32(9). |
| |
| Authors: | YANG Bing-bing QU Xue-li |
| |
| Affiliation: | YANG Bing-bing1,QU Xue-li2(1.Shaanxi Polytechnic Institute,Xianyang 712000,China,2.The Northwest Industrial Group,Xian 710043,China) |
| |
| Abstract: | The deficiency of designig the die-casting mould with a traditional ring gate design method was verified during production.In this paper,through analyzing the original die-structure and liquid metal flow states in molding process,the establishment mode of pouring system was determined and the Mould was optimization design,the rate of good product was improved. |
| |
| Keywords: | Parts with deep-cylinder and frame-type Pressure casting Ring gate Diffusing dide gate |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
