Preparation of carbon hollow fiber membranes by pyrolysis of polyetherimide

The preparation of carbon membranes by pyrolysis of polyetherimide hollow fibers and the influence of process variables on the final membrane morphology using a statistical experimental design are described in this work. The characterization of polymers and membranes was carried out by thermal analysis and scanning electron microscopy (SEM). The carbonization process was accompanied by mass spectroscopy to monitor the products formed. Similar to carbonization of others polymers, H₂O, CO₂ and CO evolution from 420 to 680 °C, and hydrogen evolution from 450 to 800 °C, indicate the formation of crosslinking of polymeric chains and formation of a graphite-like structure. These experiments permitted the production of thermostable carbon hollow fibers and selection of best treatment conditions. The extent of membrane exposure under oxidizing atmosphere and the maximum temperature of stabilization were decisive in the final membrane morphologic characteristics and properties. When the stabilization temperature was above 500 °C an intensive degradation of the fiber was observed. An initial exposure to an oxidizing atmosphere seems to be fundamental in order to control the final membrane properties. In this atmosphere, heating rates as low as 1 °C min⁻¹ during stabilization reduce cracks in the surface of final membranes.