首页 | 本学科首页   官方微博 | 高级检索  
     

基于分形理论的菱镁矿粉磨程度表征研究
引用本文:罗奔,李闯,杨云川.基于分形理论的菱镁矿粉磨程度表征研究[J].矿产保护与利用,2020,40(2):125-129.
作者姓名:罗奔  李闯  杨云川
作者单位:1.沈阳理工大学 材料科学与工程学院,辽宁 沈阳 110159
基金项目:国家重点实验室开放基金
摘    要:为了研究菱镁矿粉磨程度的定量表征,以辽宁丹东地区菱镁矿为原料,进行了磨矿试验、粒度检测试验、磨矿细度试验,应用分形理论,建立了用于表征粉磨菱镁矿颗粒粒度分布的体分形维数数学关系。结果表明:体分形维数与磨矿细度呈非线性关系,当体分形维数均值达到极大值,即D3=2.4662时,对应的磨矿细度为-0.074 mm含量81.6%,通过浮选试验发现此时浮选指标最好。该研究实现了菱镁矿粉磨程度的定量表征,建立了体分形维数与选矿浮选的联系。 

关 键 词:菱镁矿    磨矿细度    颗粒粒度分布    体分形维数    定量表征
收稿时间:2019-10-28

Study on Characterization of Magnesite Grinding Degree Based on Fractal Theory
Affiliation:1.Shenyang Ligong University, College of Materials Science and Engineering, Shenyang 110159, China2.State Key Laboratory of Mineral Processing Science and Technology, Beijing 102628, China3.Northeastern University College of Resources and Civil Engineering, Shenyang 110004, China
Abstract:In order to study the quantitative characterization of magnesite grinding degree, grinding test, particle size detection test and grinding fineness test were carried out with the raw material of magnesite derived from Dandong area of Liaoning Province. Based on the fractal theory, a mathematical model of volume fractal dimension was established to characterize the particle size distribution of magnesite grinding. The results showed that the volume fractal dimension has a non-linear relationship with the grinding fineness. When the mean value of volume fractal dimension reaches the maximum value, that is, D3=2.4662, the corresponding grinding fineness of -0.074 mm is 81.6%, while the flotation test obtained the optimal flotation index. Quantitative characterization of magnesite grinding degree was realized, and the relationship between volume fractal dimension and flotation was established in this paper. 
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《矿产保护与利用》浏览原始摘要信息
点击此处可从《矿产保护与利用》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号