| Abstract: | Polypropylene–nylon 6 10 composites were prepared by the in situ polymerization of the nylon monomers on polypropylene films. The adhesion between the nylon and the polypropylene was markedly improved by a brief corona discharge treatment of the films in nitrogen prior to coating. This improvement was demonstrated by an increase in the peel strength of the nylon coating and a decrease in brittleness of photo-oxidized compesites when corona treatment was used. Adhesive bonding between the nylon and substrate was sufficiently strong to cause cohesive failure in the corona-treated polypropylene. Only interfacial failure was observed at untreated surfaces. These effects were demonstrated by electron microscopy of the surfaces produced in peel tests. The effects of corona treatment on adhesive bonding characteristics of surfaces are discussed in terms of the chemical and physical changes observed in treated surfaces. |
