PERFORMANCE OF A PACKED-BED REACTOR

We examined the conversion rates in a packed bed catalytic reactor with a two phase upward flow in a wide range of operating conditions. The oxidation of ethanol to acetic acid in the liquid phase on a Pd-Alumina catalyst was chosen as the test reaction.

Global reaction rates were measured by changing gas velocities, temperature, and feed concentrations of ethanol in the liquid phase. The observed rates were compared with those calculated using two models, assuming a total external wetting of the catalyst. In the first model, a “kinetic” conversion rate was calculated by neglecting any interphase mass transfer resistance. In the second model the interphase mass transfer resistance was considered and expressed by an overall coefficient evaluated from published correlations. The results show that there is an hydrodynamic influence, probably due to the mass transfer and/or to the partial effective wetting of the catalyst. Mass transfer, on the other hand, is better than that observed in other cases. A comparison with the performances of a downflow trickle-bed reactor operating at the same tested conditions showed a much smaller influence of mass transfer and hydrodynamics on the overall conversion rate for the upflow reactor.