| 不锈钢装饰弯头的设计与弯曲成形 |
| |
| 引用本文： | 梁治强.不锈钢装饰弯头的设计与弯曲成形[J].模具工业,2000(11):5-7. |
| |
| 作者姓名： | 梁治强 |
| |
| 作者单位： | 佛山市商业机械厂,广东佛山,528000 |
| |
| 摘 要： | 介绍了不锈钢装饰弯头的设计、弯头最小壁厚的计算、弯头最小相对弯曲半径的计算 ,并介绍了弯头成形模以及模具设计中应注意的问题。
|
| 关 键 词： | 弯头 弯曲半径 弯曲成形模 |
Design of the Decorative Elbow of Stainless Steel and Its Formation by Bending |
| |
| Liang Zhiqiang.Design of the Decorative Elbow of Stainless Steel and Its Formation by Bending[J].Die & Mould Industry,2000(11):5-7. |
| |
| Authors: | Liang Zhiqiang |
| |
| Affiliation: | Liang Zhiqiang |
| |
| Abstract: | The design of the Decorative Stainless-Steel Elbow, the calculation of the thinnest thickness of the elbow wall, and the calculation of the smallest relative bending radius of the elbow, the forming die for the elbow and the attention items in the design of the die were introduced. |
| |
| Keywords: | elbow bending radius bending forming die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
