| 40Cr汽车转向节锻造余热淬火工艺研究 |
| |
| 引用本文： | 郑玉春,吴玉程,刘玉,黄新民,张先彬,徐高来,汪伟,吴思胜. 40Cr汽车转向节锻造余热淬火工艺研究[J]. 热加工工艺, 2004, 0(3): 47-48 |
| |
| 作者姓名： | 郑玉春 吴玉程 刘玉 黄新民 张先彬 徐高来 汪伟 吴思胜 |
| |
| 作者单位： | 1. 合肥工业大学,材料工程学院,安徽,合肥,230009
2. 安徽百协精密锻造有限公司,安徽,安庆,246005 |
| |
| 摘 要： | 40Cr钢汽车转向节锻造余热淬火与传统的常规调质处理相比，在强度、硬度提高的同时，塑性和韧性也大大提高。高温形变后淬火不仅有利于提高强韧性，而且显著节约工时与能耗。
|
| 关 键 词： | 锻造余热淬火 40Cr钢 汽车转向节 |
| 文章编号： | 1001-3814(2004)03-0047-02 |
| 修稿时间： | 2003-09-16 |
Study on Technology of Forging-remnant-heat Hardening of 40Cr Automobile Furning Junction |
| |
| ZHENG Yu-chun,WU Yu-cheng,LIU Yu,HUANG Xin-min,ZHANG Xian-bin,XU Gao-lai,WANG Wei,WU Si-sheng. Study on Technology of Forging-remnant-heat Hardening of 40Cr Automobile Furning Junction[J]. Hot Working Technology, 2004, 0(3): 47-48 |
| |
| Authors: | ZHENG Yu-chun WU Yu-cheng LIU Yu HUANG Xin-min ZHANG Xian-bin XU Gao-lai WANG Wei WU Si-sheng |
| |
| Affiliation: | ZHENG Yu-chun~1,WU Yu-cheng~1,LIU Yu~1,HUANG Xin-min~1,ZHANG Xian-bin~2,XU Gao-lai~2,WANG Wei~2,WU Si-sheng~2 |
| |
| Abstract: | Comparing with traditional quenching and tempering technology,the forging-remnant-heat hardening technology route for 40 Cr furning junction lead to an increase in the strength and handness,as well as the plasticity and ductility.It was fornd that the high-temperature-deformation heat treament not only improved the strength and ductility,but also saved the working-hour and energy. |
| |
| Keywords: | forging-remnant-heat hardening 40Cr steel furning junction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
