Electrical properties of (Ba,Sr)TiO3 on (Sr,Ca)RuO3 electrode |
| |
| Authors: | Seung Young Son Boum Seock Kim Se Hoon Oh Duck Kyun Choi Cha Young Yoo Sang In Lee Z. R. Dai Fumio S. Ohuchi |
| |
| Affiliation: | (1) Department of Inorganic Materials Engineering, Hanyang University, Seoul, 133–791, Korea;(2) Semiconductor R&D Center, Samsung Electronics Co., San, No. 24, Nongseo-Lee, Kiheung-Eup, Yongin-Gun, Kyungki-Do, 449–900, Korea;(3) Department of Material Science and Engineering, University of Washington, Seattle, WA 19890, USA |
| |
| Abstract: | A perovskite (Sr,Ca)RuO3 [SCR] electrode has been explored in order to utilize its advantages in structural match with (Ba,Sr)TiO3 [BST] films, which may enhance the electrical properties of BST films. The SCR electrode led to the leakage current density (10–7 A/cm2) of BST films an order lower than that on RuO2. The leakage current was not sensitive to the composition of the SCR electrodes, while the dielectric constant of the BST thin film capacitor ranged from 160 to 280 depending on the Sr/Ca ratio in SCR electrodes. The BST/SCR (Sr/Ca = 7/3) system resulted in a 5–nm thick interfacial layer. Furthermore, the interfacial layer turned out to be partially crystallized according to the lattice image taken by an HRTEM. It is believed that such enhancement in electrical properties of BST films could be induced by the improvement of interfacial characteristics through structural matching. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
