首页 | 本学科首页   官方微博 | 高级检索  
     

多元体系铂饰品校正样品的研制及在X射线荧光无损检测中应用
引用本文:宋永清,卜赛斌,陆少兰,刘洋,黄永忠.多元体系铂饰品校正样品的研制及在X射线荧光无损检测中应用[J].冶金分析,2004,24(2):1-1.
作者姓名:宋永清  卜赛斌  陆少兰  刘洋  黄永忠
作者单位:国家有色金属及电子材料分析测试中心,国家有色金属及电子材料分析测试中心,国家有色金属及电子材料分析测试中心,国家有色金属及电子材料分析测试中心,国家有色金属及电子材料分析测试中心 北京 100088,北京 100088 ,北京 100088 ,北京 100088 ,北京 100088
摘    要:研制了成分为Pt,Pd,Au,Ag,Cu,Zn,Ni,Co的多元体系的铂饰校正样品,并用于多元体系铂饰品的X射线荧光光谱无损检测,结果令人满意。测量结果误差<1.0%,符合GB/T18043-2000国家标准规定的允许差,方法RSD小于3.0%。

关 键 词:铂饰品  校正样品  无损检测  X射线荧光光谱  
文章编号:1000-7571(2004)02-0060-03
修稿时间:2003年3月8日

Preparation of calibration sample for multicomponent platinum jewelry and its application in nondestructive testing by XRF
SONG Yong-qing,BU Sai-bin,LU Shao-lan,LIU Yang,HUANG Yong zhong.Preparation of calibration sample for multicomponent platinum jewelry and its application in nondestructive testing by XRF[J].Metallurgical Analysis,2004,24(2):1-1.
Authors:SONG Yong-qing  BU Sai-bin  LU Shao-lan  LIU Yang  HUANG Yong zhong
Abstract:The preparation of the calibration samples for multicomponent platinum jewelry is studied in this article.The components of the calibration samples are Pt,Pd,Au,Ag,Cu,Zn,Ni and Co.The samples have been applied to the nondestructive testing for the platinum jewelry of multicomponent with satisfactory results.The error of measurement is within 1.0%.The results of XRF agree with that of chemical method.The relative standard deviation(RSD) of the method is within 3.0%
Keywords:platinum jewelry  calibration sample  nondestructive testing  XRF  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《冶金分析》浏览原始摘要信息
点击此处可从《冶金分析》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号