首页 | 本学科首页   官方微博 | 高级检索  
     

阀式浇注系统优化控制技术在注塑模中的应用
引用本文:谭文胜,周建忠.阀式浇注系统优化控制技术在注塑模中的应用[J].轻工机械,2005,23(4):98-101.
作者姓名:谭文胜  周建忠
作者单位:江苏大学机械工程学院,江苏,镇江,212013;常州工学院机电工程学院,江苏,常州,213002;江苏大学机械工程学院,江苏,镇江,212013
基金项目:江苏省普通高校自然科学研究计划资助项目(0SKJD460015)
摘    要:在分析注塑模普通浇注系统的基础上,为解决注塑成型存在的问题,介绍了一种新型阀式浇注控制系统,阐述了闯式浇注系统优化控制的关键技术,通过对浇注系统的浇口控制充填模式研究,以注塑流动分析为理论基础,依靠CAE分析技术对浇注充填过程进行流动模拟,科学准确地对阀式浇注系统的浇口位置确认,并根据分析结果应用热流道和自动控制技术对注塑工艺进行优化控制(如浇口阀门的开关时机、打开方式),为阀式浇注系统优化控制的实现提供基础。

关 键 词:阀式浇注  注塑CAE  热流道  自动控制
文章编号:1005-2895(2005)04-0098-04
收稿时间:2005-04-11
修稿时间:2005-04-11

The Optimized-control Technique of Valve-injection System and Its Application in Injection Mould
TAN Wen-sheng,ZHOU Jian-zhong.The Optimized-control Technique of Valve-injection System and Its Application in Injection Mould[J].Light Industry Machinery,2005,23(4):98-101.
Authors:TAN Wen-sheng  ZHOU Jian-zhong
Affiliation:1. School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013 2. School of Mechanical Electrical Engineering,Changzhou Institute of Technology, Changzhou Jiangsu 213002,China
Abstract:With the general injection system of mould analyzed, a new control technique of valve-injection is introduced in order to solve the problem of filling process, and the important optimize-control technique of valve-injection is studied. In this research,the theory of CAE is a key technique for valve-injection system to be controlled. According to CAE, the simulation of filling process will be analyzed and the optimum location of gates is found. With hot runner and autocontrol technique, the filling process may be optimized controled based on CAE for time-control and method-control and thus can be regarded as a basis for optimized-control of valveinjection system.
Keywords:valve-injection  CAE  hot runner  autocontrol technique
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号