High Q metal strip SSBW resonators using a SAW design |
| |
Authors: | Avramov I D |
| |
Affiliation: | Inst. of Solid State Phys., Sofia. |
| |
Abstract: | An experimental study of metal strip surface skimming bulk wave (SSBW) resonators using a surface acoustic wave (SAW) design is presented. Characteristics of SSBW and SAW resonators fabricated with the same photolithographic mask are compared and discussed. High Q low-loss SSBW resonators are achieved using a conventional two-port SAW resonator design and taking special care of the distance L between both interdigital transducers, the metal thickness h/lambda (lambda=acoustic wavelength) and the finger-to-gap ratio. Best overall performance of the SSBW devices in this study is achieved at L=nlambda/2-lambda/4 (compared with L=nlambda/2-lambda/8 for SAW resonators), h /lambda=1.6% (compared with 2% for SAW), and finger-to-gap ratio close to 1. The best device fabricated shows an unloaded Q of 5820 and an insertion loss of 7.8 dB at 766 MHz. The SSBW resonant frequency shows a stronger dependence on the metal thickness than the SAW one. This problem, however, is readily solved by frequency trimming using a CF(4) plasma etching technique. SSBW resonator can be trimmed by 0.2% down in frequency (compared with 0.05% for SAW) without affecting their performance. |
| |
Keywords: | |
本文献已被 PubMed 等数据库收录! |
|