首页 | 本学科首页   官方微博 | 高级检索  
     

组合声源测试消声器传递损失的噪声信号修正方法
引用本文:谢丽萍,卢炽华,刘志恩,付友明,朱亚伟. 组合声源测试消声器传递损失的噪声信号修正方法[J]. 声学技术, 2019, 38(4): 440-445
作者姓名:谢丽萍  卢炽华  刘志恩  付友明  朱亚伟
作者单位:武汉理工大学现代汽车零部件技术湖北省重点实验室;汽车零部件技术湖北省协同创新中心
基金项目:国家重点研发计划(2016YFD0700704B)国家自然基金(51575410)
摘    要:针对某些传递损失较大的消声器,现有白噪声测试设备的单一噪声源发生器无法满足消声量的测试需求。通过采用低频和中频两种声源发生器,利用过渡管道与测试管道垂直连接的方式,实现了两种声源组合发声对消声器声学性能的测试。为了解决过渡管道与组合声源系统连接处声阻抗变化,导致输出的噪声信号频谱特性随机波动的问题,提出了一种噪声信号的修正方法。该方法基于四传感器法测量过渡管道声阻抗,根据过渡管道传递矩阵,以随机白噪声为激励源输出的管口噪声作为输出声压信号,得到组合声源系统的输入声压信号,实现了对组合声源系统声音信号的补偿。实验结果表明,与传统均衡器调节方法相比,该方法能够在较宽的测试频率范围内输出平稳的声压信号;其次,利用修正前后的声学信号对扩张腔的传递损失进行测量,修正后得到的测试曲线与理论值吻合度较高,证明了该方法的可行性。

关 键 词:噪声源  传递损失  声阻抗  传递矩阵  声音信号补偿
收稿时间:2019-01-09
修稿时间:2019-03-29

A noise signal correction method for muffler transmission loss measurement with combined sound source
XIE Li-ping,LU Chi-hu,LIU Zhi-en,FU You-ming and ZHU Ya-wei. A noise signal correction method for muffler transmission loss measurement with combined sound source[J]. Technical Acoustics, 2019, 38(4): 440-445
Authors:XIE Li-ping  LU Chi-hu  LIU Zhi-en  FU You-ming  ZHU Ya-wei
Affiliation:Hubei Key Laboratory of Advanced Technology of Automotive Components, Wuhan University of Technology, Wuhan 430070, Hubei, China,Hubei Key Laboratory of Advanced Technology of Automotive Components, Wuhan University of Technology, Wuhan 430070, Hubei, China,Hubei Key Laboratory of Advanced Technology of Automotive Components, Wuhan University of Technology, Wuhan 430070, Hubei, China;Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan 430070, Hubei, China,Hubei Key Laboratory of Advanced Technology of Automotive Components, Wuhan University of Technology, Wuhan 430070, Hubei, China and Hubei Key Laboratory of Advanced Technology of Automotive Components, Wuhan University of Technology, Wuhan 430070, Hubei, China
Abstract:For some mufflers with high transmission loss, the single noise source generator of existing white noise test equipment cannot meet the test requirements of the noise reduction amount. In this paper, the acoustic performance of muffler is tested by the combination of low frequency and medium frequency noise generators and the vertical connection between the transition pipe and the test pipe. In order to solve the problem of random fluctuation of the spectral characteristics of output noise signal, which is caused by the change of acoustic impedance at the junction of the transition pipeline and the combined sound source system, a correction method for combining noise signals is proposed. This method is based on the four-sensor method to measure the acoustic impedance of the transition pipeline. According to the transfer matrix of transition pipeline, the noise at the pipe orifice, which is the output of a random white noise excitation source, is used as the output sound pressure signal to obtain the input sound pressure signal of the combined sound source system and realize the sound signal compensation of the system. The experimental results show that compared with the traditional equalizer adjustment method, this method can achieve a stable sound pressure signal output in a wide range of test frequencies and the noise signal obtained meets the test requirements. Secondly, the acoustic signal before and after the correction is used to measure the transmission loss of the expansion cavity. The measured curve after correction is in good agreement with the theoretical one, which proves the feasibility of this method.
Keywords:noise source  transmission loss  acoustic impedance  transfer matrix  sound signal compensation
本文献已被 CNKI 等数据库收录!
点击此处可从《声学技术》浏览原始摘要信息
点击此处可从《声学技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号