一次性注射器筒体注射模设计 |
| |
引用本文: | 廖晓明,林浩波,刘军辉. 一次性注射器筒体注射模设计[J]. 塑料制造, 2009, 0(7): 95-96 |
| |
作者姓名: | 廖晓明 林浩波 刘军辉 |
| |
作者单位: | 河源职业技术学院,517000 |
| |
摘 要: | 根据一次性注射器简体的生产数量和质量要求,对塑件外形结构进行分析,设计了模具的结构形式。采用了点式浇口的双分型面结构,为同类产品注射模生产提供了参考。
|
关 键 词: | 一次性注射器 简体 模具设计 注射模 |
Design of Injection Mold for the Cylinder of One-time Syring |
| |
Abstract: | According to the production and the demond of product quality of the cylinder of one-time syringe,the structure of the product is analyzed,and the injection mold is designed,point gate and two-plate mold system is used ,it has references to design of similar injection mold. |
| |
Keywords: | One-time syringes Cylinder Mold design Injection mold |
本文献已被 CNKI 维普 等数据库收录! |
|