| 航天运载器支架式主结构承载性能的有限元分析 |
| |
| 引用本文： | 彭超义,曾竟成,肖加余,杜刚,江大志.航天运载器支架式主结构承载性能的有限元分析[J].导弹与航天运载技术,2005(6):16-20. |
| |
| 作者姓名： | 彭超义 曾竟成 肖加余 杜刚 江大志 |
| |
| 作者单位： | 国防科技大学航天与材料工程学院,长沙,410073 |
| |
| 摘 要： | 航天运载器主结构的功能是把载荷从一种结构传递到另一种结构上.依据对美国可重复使用运载器X-33和Atlas V型火箭上两种典型支架式CFRP(碳纤维增强树脂基复合材料)主结构的分析,建立了两种支架结构的有限元模型,计算了在支架轴向力、横向力和绕纵轴的扭矩及综合载荷作用下支架结构的形变、压缩比、偏心率和CFRP管件的轴向应力,通过计算结果对两种支架式主结构的承载性能特点进行了分析.
|
| 关 键 词： | 航天器 支架 主结构 承载性能 有限元分析 |
| 文章编号： | 1004-7182（2005）06-0016-05 |
| 收稿时间： | 2005-02-17 |
| 修稿时间： | 2005-05-30 |
Load-bearing Capacity Analysis of Primary Truss Structures of Space Launch Vehicles |
| |
| Peng Chaoyi,Zeng Jingcheng,Xiao Jiayu,Du Gang,Jiang Dazhi.Load-bearing Capacity Analysis of Primary Truss Structures of Space Launch Vehicles[J].Missiles and Space Vehicles,2005(6):16-20. |
| |
| Authors: | Peng Chaoyi Zeng Jingcheng Xiao Jiayu Du Gang Jiang Dazhi |
| |
| Affiliation: | College of Aerospace and Marterial Engineering, National Univ. of Defence Technology, Changsha, 410073 |
| |
| Abstract: | Primary vehicle structure(PVS) is defined as the structure that carries loads from one to another structure or structures.Based on the analysis of two typical carbon fiber reinforced plastics(CFRP) truss structures used on the X-33 and Atlas V,two finite element analysis(FEA) models were constructed.The FEA models were employed to calculate the deformation,compressive ratio,and eccentricity of the truss structures and the axial compressive stresses of the CFRP cylindrical tubes under axial forces,transverse forces,and torsional forces.Consequently the load-bearing capacity characteristics of the two typical primary truss structures are analyzed. |
| |
| Keywords: | Spacecraft Truss Primary structure Load-bearing capacity FEA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
