| PIC实现激光打标设备测控系统的研究与设计 |
| |
| 引用本文： | 范海健,崔鸣. PIC实现激光打标设备测控系统的研究与设计[J]. 现代电子技术, 2007, 30(9): 132-133 |
| |
| 作者姓名： | 范海健 崔鸣 |
| |
| 作者单位： | 苏州市职业大学,江苏苏州,215104 |
| |
| 摘 要： | 基于智能传感技术和微处理器技术,提出了基于PIC16F876的激光打标设备测控系统,系统上电复位后,系统处于监测状态。当温度超出上(下)限设定点,微控制器立即启动(关闭)冷却系统。当冷却腔体流量、温度出现异常时,发出报警信息,切断激光电源。确保激光打标设备中装有氪灯的冷却腔体内温度处于安全范围。
|
| 关 键 词： | 智能传感器 智能监测 激光打标 |
| 文章编号： | 1004-373X（2007）09-132-02 |
| 收稿时间： | 2006-09-06 |
| 修稿时间： | 2006-09-06 |
Research and Design of Supervisory System of Laser Mark Equipments System with PIC |
| |
| FAN Haijian,CUI Ming. Research and Design of Supervisory System of Laser Mark Equipments System with PIC[J]. Modern Electronic Technique, 2007, 30(9): 132-133 |
| |
| Authors: | FAN Haijian CUI Ming |
| |
| Affiliation: | Suzhou Vocational University,Suzhou,215104,China |
| |
| Abstract: | Based on the intelligence sensor and the microprocessor technique,this article puts forward a supervisory control system of laser mark equipments based on PIC16F876.After resetting,the system is placed in the control of monitoring.When the temperature outruns the upper or lower limit set in advance,the microprocessor starts or shuts off the cooling system immediately.When the flow of cooling system appears abnormally,the microprocessor sends out the alarm and cuts off supply of the laser power,so that the valuable parts in the laser mark equipments,such as the krypton light,will not be over-hot and damaged. |
| |
| Keywords: | PIC16F876 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
