| 基于ARM处理器的Zigbee网关设计 |
| |
| 引用本文： | 邢锐,王维.基于ARM处理器的Zigbee网关设计[J].光机电信息,2011,28(3):42-46. |
| |
| 作者姓名： | 邢锐 王维 |
| |
| 作者单位： | 邢锐,XING Rui(中国科学院,苏州纳米技术与纳米仿生研究所学科交叉部融合通信实验室,江苏苏州,215123;长春理工大学光电工程学院仪器科学与技术系,吉林长春,130022);王维,WANG Wei(中国科学院,苏州纳米技术与纳米仿生研究所学科交叉部融合通信实验室,江苏苏州,215123) |
| |
| 摘 要： | 针对Zigbee网关无法连入以太网的问题.提出一种基于ARM平台的无线传感网络嵌入式网关的设计方案.硬件以ARM9芯片S3C2410和CC2430无线模块为核心进行设计,实现了Zigbee网络与以太网络的互联,从而可将检测、控制设备连入互联网,实现更广阔的网络控制平台.
|
| 关 键 词： | Zigbee 以太网 ARM 网关 Linux |
Zigbee Gateway Design based on ARM Processor |
| |
| XING Rui,WANG Wei.Zigbee Gateway Design based on ARM Processor[J].OME Information,2011,28(3):42-46. |
| |
| Authors: | XING Rui WANG Wei |
| |
| Affiliation: | XING Rui1,2,WANG Wei1 (1. Lab of Syncretic Communication,Department of Subject Cross,Suzhou Institute of Nano-tech and Nano-bionics,Chinese Academy of Sciences,Suzhou 215123,China,2. Department of Instrument of Science and Technology,School of Optical Engineering,Changchun University of Science and Technology,Changchun 130022,China) |
| |
| Abstract: | According to the problem that Zigbee gateway couldn’t be connected to the ethernet, an embedded wireless sensor network gateway design based on ARM was proposed in this paper. S3C2410 chip and CC2430 radio module were the core of the hardware design. The connection between Zigbee network and ethernet network was realized,which could make detection and control equipments be connected to the internet, and make them achieve a broader network control platform. |
| |
| Keywords: | Zigbee ARM Linux |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
