| 一种基于超材料的吸波结构设计 |
| |
| 引用本文： | 占生宝,刘涛,倪受春,肖文标,付翔. 一种基于超材料的吸波结构设计[J]. 兵器材料科学与工程, 2013, 36(1): 78-82 |
| |
| 作者姓名： | 占生宝 刘涛 倪受春 肖文标 付翔 |
| |
| 作者单位： | 滁州学院,安徽滁州,239000;空军工程大学电讯工程学院,陕西西安,710077;中国人民解放军94840部队,江苏南京,210007 |
| |
| 基金项目： | 中国博士后科学基金，安徽省高校省级自然科学项目资助课题 |
| |
| 摘 要： | 设计一种基于电磁超材料的吸波体。该吸波体由两层金属及其中间的有耗介质组成，上层金属是由刻蚀交叉缝隙贴片形成的电谐振器，下层金属不做刻蚀，作为接地平面。通过优化结构参数，得到一种极化不敏感、宽入射角的超薄吸波结构，其吸波率达到99.7%，厚度只有约0.009λ。分析该吸波体的吸收机理及结构参数对吸波性能的影响。测试结果表明，该设计所获得的结果与仿真结果几乎一致。
|
| 关 键 词： | 吸波体 超材料 极化稳定 |
Structure design of absorber based on metamaterial |
| |
| ZHAN Shengbao , LIU Tao , NI Shouchun , XIAO Wenbiao , FU Xiang. Structure design of absorber based on metamaterial[J]. Ordnance Material Science and Engineering, 2013, 36(1): 78-82 |
| |
| Authors: | ZHAN Shengbao LIU Tao NI Shouchun XIAO Wenbiao FU Xiang |
| |
| Affiliation: | 1(1.Chuzhou Institute,Chuzhou 239000,China;2.Telecommunication Engineering Institute,Air Force Engineering University,Xi′an 710077,China;3.Unit 94840 of PLA,Nanjing 210007,China) |
| |
| Abstract: | A metamaterial absorber was designed.It is composed of two metallic layers separated by a lossy dielectric spacer.The top layer consists of etched oblique cross-gap patch set in a periodic pattern and the bottom one is a solid metal.By optimizing geometry parameters of the structure,a polarization-insensitive,wide-incident-angle ultra-thin absorber whose absorption is 99.7% and thickness is only 0.009λ was obtained.The absorbing mechanism and the effect of structure parameters on absorbing performance were analyzed,respectively.The experiment results have a good agreement with the simulation results. |
| |
| Keywords: | absorber metamaterial polarization-insensitive |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
