| 不锈钢／Al固液轧制复合过程温度场模拟 |
| |
| 引用本文： | 许光明 崔建忠. 不锈钢／Al固液轧制复合过程温度场模拟[J]. 金属学报, 1999, 35(2): 131-133 |
| |
| 作者姓名： | 许光明 崔建忠 |
| |
| 作者单位： | 东北大学材料与冶金学院!沈阳１１０００６ |
| |
| 基金项目： | 国家863计划!715－009－0060 |
| |
| 摘 要： | 通过分析固液相轧制复合不锈钢／Ａｌ工艺的特点，对轧制复合过程的边界条件进行了简化，利用能量平衡法和有限差分方法推导了数学模型，并计算了固液相轧制复合时的温度场和极限轧制速度，其结果与实验时所测得的值基本相符。
|
| 关 键 词： | 轧制复合 温度场 极限速度 不锈钢 铝 模拟 |
SIMULATION OF TEMPERATURE FIELD IN LIQUID/SOLID ROLLING BONDING OF STEEL/Al |
| |
| XU Guangming,CUI Jianzhong. SIMULATION OF TEMPERATURE FIELD IN LIQUID/SOLID ROLLING BONDING OF STEEL/Al[J]. Acta Metallurgica Sinica, 1999, 35(2): 131-133 |
| |
| Authors: | XU Guangming CUI Jianzhong |
| |
| Abstract: | Based on analyzing the characteristic of liquid-solid rolling bonding which is used toproduce stainless steel/Al clad plates ,the boundary condition was simplified, the energy balance and finitedifference method were adopted to deduce the mathematical model, the model was used to calculate thetemperature field and the maximum rolling speed of the process, the result was closed to the measuredone. The calculated result was useful to the research. |
| |
| Keywords: | solid/liquid roiling bonding temperature field limited speed stainless steel/Al |
| 本文献已被 CNKI 维普 等数据库收录！ |
