Determination of the reflector type from an image reconstructed using echo signals measured with ultrasonic antenna arrays

The application of the digital image focusing (DFA) method to the determination of the types of detected reflectors is considered. For this purpose two antenna arrays (AAs) are used, which are placed on opposite sides of the reflector and using which echo signals are recorded in three acoustic channels in the double-scanning mode. The first and second acoustic channels transmit and receive echo signals using the first and second AA, respectively, and the third channel is tuned so that the first AA transmits pulses and the second AA receives echo signals. Using signals in each channel, many partial images can be reconstructed in a common coordinate system according to different acoustic schemes with allowance for both multiple reflections from irregular boundaries of a tested object and effects of transformation of the wave types. Combining partial images makes it possible to obtain a high-quality image, in which the entire boundary of the reflector is seen and using which an attempt to automate the procedure of evaluating the reflector size and determining its type was made. Such an approach allows one to reduce the subjective influence of an operator on the testing results. It is shown that in order to increase the image resolution, the spectrum of echo signals can be extrapolated by the spectrum splitting method jointly with the construction of an AR model of their spectrum. The results of model experiments that confirm the possibility of determining the reflector type are presented.