| 盒形塑件浇口位置的选择 |
| |
| 引用本文： | 史安娜,王晓方. 盒形塑件浇口位置的选择[J]. 模具工业, 2000, 0(4): 31-32 |
| |
| 作者姓名： | 史安娜 王晓方 |
| |
| 作者单位： | 沈阳工业学院,辽宁沈阳,110045 |
| |
| 摘 要： | 介绍了盒形塑料浇口位置的选择原则 ,并用具体实例 ,对模具形式及工艺进行了比较 ,认为点浇口形式较适合盒形塑件的成型
|
| 关 键 词： | 注射模 点浇口 侧浇口 |
Selection of the Gate Location for the Box-Shaped Parts |
| |
| Shi Anna et al. Selection of the Gate Location for the Box-Shaped Parts[J]. Die & Mould Industry, 2000, 0(4): 31-32 |
| |
| Authors: | Shi Anna et al |
| |
| Abstract: | The principle for selecting the gate location for the box_shaped plastic parts was introduced. A comparison was made on the mould form and the technological process through concrete examples, and it turned out that the pin_point gate form is relatively more fit for the moulding of the box_shaped plastic parts. |
| |
| Keywords: | injection mould pin_point gate edge gate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
