| 基于FPGA的多模式实时立体显示系统设计 |
| |
| 引用本文： | 刘来成,周文晖,楼斌,郑宁. 基于FPGA的多模式实时立体显示系统设计[J]. 杭州电子科技大学学报, 2011, 0(5): 179-182 |
| |
| 作者姓名： | 刘来成 周文晖 楼斌 郑宁 |
| |
| 作者单位： | 杭州电子科技大学计算机应用技术研究所; |
| |
| 摘 要： | 针对目前嵌入式立体显系统存在的不足,该文提出一种基于FPGA的实时多模式立体显示的设计方案.该方案不仅包含了分时立体和分色立体两种主流的立体显示模式,并包含了两者之间的切换.该系统包含了采集模块,4端口SDRAM控制器和立体时序控制模块.结合自制CMOS双目摄像头子卡实现了基于FPGA的多模式实时立体显示.最后,利用设...
|
| 关 键 词： | 现场可编程逻辑门阵列 立体显示 多模式 分时 分色 |
FPGA-based Multi-mode to Achieve Real-time Stereoscopic Display System |
| |
| LIU Lai-cheng,ZHOU Wen-hui,LOU Bin,ZHENG Ning. FPGA-based Multi-mode to Achieve Real-time Stereoscopic Display System[J]. Journal of Hangzhou Dianzi University, 2011, 0(5): 179-182 |
| |
| Authors: | LIU Lai-cheng ZHOU Wen-hui LOU Bin ZHENG Ning |
| |
| Affiliation: | LIU Lai-cheng,ZHOU Wen-hui,LOU Bin,ZHENG Ning(Institute of Computer Application Technology,Hangzhou Dianzi University,Hangzhou Zhejiang 310018,China) |
| |
| Abstract: | According to the shortcomings of the embedded-based stereoscopic display,this paper proposed a real time system that FPGA-based multi-mode stereoscopic display system.This system not only realized time division and color separation stereoscopic display functions,but also can switch between two modes.This system contains capture block,4-ports SDRAM controller block and the stereoscopic display sequential control block.Based on the self made daughter board,which have two cmos cameras,we realized FPGA-based mu... |
| |
| Keywords: | FPGA stereoscopic display multi-mode time division color separate |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
