基于规范变量残差的化工过程微小故障检测与诊断

微小故障因其幅值低而易被噪声和过程扰动所掩盖,并且会随时间慢慢演变成过程中的严重故障.因此,微小故障的检测和诊断变得越来越重要.为了更有效地监测和诊断微小故障,提出了基于规范变量残差的化工过程微小故障检测和诊断方法.首先,对Hankel矩阵执行奇异值分解来获得主元和残差空间并根据过去和未来数据的差异,求得两个不同的规范...

Canonical residual based incipient fault detection and diagnosis for chemical process

Incipient faults can be easily submerged by noise and process disturbance because of their low amplitudes,and will gradually evolve into serious faults in the process over time. Therefore, incipient faults detection is increasinglybecoming more and more important. To monitor and diagnose incipient faults more efficiently, detection and diagnosisof incipient faults for chemical processes based on canonical residuals are proposed. First, singular value decompositionis performed on the Hankel matrix to obtain state space and residual space. Next, according to the difference of past andfuture data, two different canonical residuals d1, d2 are obtained. Then, considering the time series characteristics of thedata, two weighted average statistics WD1, WD2 based on canonical residual and its control limit can be determined forfault detection. Then, the normalized contribution of each statistic is calculated and the two-dimensional contribution plotsare drawn to perform fault diagnosis. Finally, the application of two kinds of incipient faults in the continuous stirred tankreactor (CSTR) was studied, the results show that compared with the conventional statistics T2, Q and the statistic D inCVDA those weighted average statistics based on canonical residual can not only detect incipient faults in time, but alsoimprove the fault detection rates and fault diagnosis rates to varying degrees.