| 淬硬轴承钢磨削后的表面硬度 |
| |
| 引用本文： | 冯宝富,马春荣.淬硬轴承钢磨削后的表面硬度[J].辽宁石油化工大学学报,2005,25(2):42-45. |
| |
| 作者姓名： | 冯宝富 马春荣 |
| |
| 作者单位： | 1.福州大学机械工程及自动化学院, 福建福州350002;
2.抚顺职业技术学院, 辽宁抚顺113006 |
| |
| 基金项目： | 福建省青年科技人才创新基金 |
| |
| 摘 要： | 基于Jeager 的移动热源理论建立热模型, 预测磨削表面温度。研究了淬硬轴承钢及一些低合金钢回火硬度与回火温度的关系。建立了回火硬度与回火温度关系的回火效应模型。磨削热导致回火引起淬硬钢磨削后表面硬度变化。通过合并磨削热模型和回火效应可以预测工件磨削后的表面硬度变化。进行了淬硬GCr15 轴承钢的高速磨削试验, 研究了工件速度和磨削深度对磨削后表面硬度的影响。试验值与预测值能够较好吻合。
|
| 关 键 词： | 回火效应 磨削 表面完整性 表面硬度 |
| 文章编号： | 1672-6952(2005)02-0042-04 |
| 收稿时间： | 2004-12-09 |
| 修稿时间： | 2004年12月9日 |
Surface Hardness After Grinding for Hardened Bearing Steel |
| |
| FENG Bao-fu,MA Chun-rong.Surface Hardness After Grinding for Hardened Bearing Steel[J].Journal of Liaoning University of Petroleum & Chemical Technology,2005,25(2):42-45. |
| |
| Authors: | FENG Bao-fu MA Chun-rong |
| |
| Affiliation: | 1.School of Mechanical Engineering & Automation , Fuzhou University , Fuzhou Fujian 350002 , P .R .China ;
2 .Fushun Higher Vocational Technical Institue , Fushun Liaoning 113006, P .R .China |
| |
| Abstract: | Thermal model based on Jeager's heat resource theory was established to predict grinding surface temperature. The relations between the tempering hardness and the temperature for hardened bearing steel and low alloy steel were studied. The tempering behavior model of relationship between tempering hardness and temperature was set up. Tempering resulting from grinding heat caused surface hardness changes of hardened steels after grinding. Combining the tempering behavior with the grinding thermal model, the change in surface hardness due to grinding heat could be predicted. Experiments of high speed grinding for GCr15 bearing steel were done. The effects of work speed and grinding depth on surface hardness were researched. The predictive values accord with the experimental results. |
| |
| Keywords: | Tempering behavior Grinding Surface integrity Surface hardness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《辽宁石油化工大学学报》浏览原始摘要信息 |
|
点击此处可从《辽宁石油化工大学学报》下载全文 |
