| 均匀设计法在聚醚醚酮复合材料摩擦学特性试验中的应用研究 |
| |
| 引用本文： | 李纪云,曾群锋,彭旭东.均匀设计法在聚醚醚酮复合材料摩擦学特性试验中的应用研究[J].润滑与密封,2007,32(7):13-15. |
| |
| 作者姓名： | 李纪云 曾群锋 彭旭东 |
| |
| 作者单位： | 1. 浙江工业大学机械制造及自动化教育部重点实验室,浙江杭州,310032
2. 浙江工业大学机械制造及自动化教育部重点实验室,浙江杭州,310032;西安交通大学现代设计及转子轴承系统教育部重点实验室,陕西西安,710049 |
| |
| 基金项目： | 国家自然科学基金;中国石油天然气集团公司资助项目 |
| |
| 摘 要： | 采用均匀设计法设计了CF/SiO2/PTFE/PEEK复合材料,并模压成型;在摩擦磨损试验机上研究了PEEK复合材料的摩擦学特性,应用回归分析法对其摩擦学特性试验数据进行了分析,得到了摩擦学特性参数的回归公式。结果表明,均匀设计法应用于PEEK复合材料的摩擦学特性研究是可行的,能有效预测复合材料的摩擦学特性参数,回归分析结果与复合材料的摩擦磨损试验数据相吻合。
|
| 关 键 词： | 均匀设计 回归分析 配方 |
| 文章编号： | 0254-0150（2007）7-013-3 |
| 修稿时间： | 2007-02-02 |
Application of Uniform Design Method to the Experimental Study of Tribological Behavior of PEEK Based Composites |
| |
| Li Jiyun,Zeng Qunfeng,Peng Xudong.Application of Uniform Design Method to the Experimental Study of Tribological Behavior of PEEK Based Composites[J].Lubrication Engineering,2007,32(7):13-15. |
| |
| Authors: | Li Jiyun Zeng Qunfeng Peng Xudong |
| |
| Abstract: | The reinforced PEEK based composites filled with carbon fiber, nano-meter SiO2 and PTFE were formulated by the uniform design method and prepared by heat compression molding. Its tribological behavior was studied in the friction and wear tester, the experimental data was analyzed by regression analysis, and regression formula was obtained. The results show that the uniform design can predict effectively the coefficient of friction and specific wear rate of the composite and the numerical solutions based on the multiple regression were in agreement with the experimental results. |
| |
| Keywords: | PEEK |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
