| 金属薄板辊压冲裁的研究与装置设计 |
| |
| 引用本文： | 余蔚荔,余冠洲. 金属薄板辊压冲裁的研究与装置设计[J]. 煤矿机械, 2007, 28(5): 159-161 |
| |
| 作者姓名： | 余蔚荔 余冠洲 |
| |
| 作者单位： | 1. 广东机电职业技术学院,广州,510515
2. 广东工业大学,广州,510075 |
| |
| 摘 要： | 提出了辊压冲裁方式,用辊压代替传统的冲压,用斜刃剪切代替平刃冲切,有效地降低了工作噪音并大大提高了生产率,具有推广价值,同时对辊压冲裁装置进行了设计和研究应用。
|
| 关 键 词： | 辊压冲裁 冲切 剪切 |
| 文章编号： | 1003-0794（2007）05-0159-03 |
| 修稿时间： | 2007-02-06 |
Study on Rolling Blanking of Thin Plate and Equipment Design |
| |
| YU Wei-li,YU Guan-zhou. Study on Rolling Blanking of Thin Plate and Equipment Design[J]. Coal Mine Machinery, 2007, 28(5): 159-161 |
| |
| Authors: | YU Wei-li YU Guan-zhou |
| |
| Abstract: | Forward a cutting method of rolling blanking, in which conventional stamping is replaced by rolling blanking, and the cutting of flat point is replaced by cutting of skew point. The cutting method availably lowering the work noise and raising the productivity, so it has applied value of popularize. It also studied and designed the equipment of rolling blanking. |
| |
| Keywords: | rolling blanking stamping skew cutting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
