3D打印一体化制备阴极热子组件研究

基于增材制造的技术特点, 设计完成了适用于3D打印的阴极热子组件模型, 并通过选择性激光熔融技术一体化3D打印完成了直径为3 mm和5 mm的样品, 并对样品展开了相应的后处理工艺研究, 包括去除支撑结构、热子绝缘防护和浸渍发射盐等。结果表明, 新型组件的热子能够将阴极加热至900~1100℃的工作温度范围; 在水冷阳极二极管中测试, 1100℃下阴极拐点发射电流密度达到7.94 A·cm-2。

Study on integrated fabrication of cathode-heater assembly by 3D printing

The cathode-heater assembly model for 3D printing was designed based on the technical characteristics of additive manufacturing. The samples in the diameters of 3 mm and 5 mm were 3D-printed by selective laser melting; meanwhile, the corresponding post-treatments for the samples were carried out, including the removal of support structure, the insulation protection of heater, and the impregnation of active material. The results show that, the cathode can be heated to the work temperature in range of 900~1100 ℃ by the new heater assembly, and the emission current density at the cathode inflexion can achieved as 7.94 A·cm-2 at 1100 ℃ in water-cooled diode test.