| 双圆弧柔轮结构参数对柔轮应力的影响分析 |
| |
| 引用本文： | 马亮,武兵,沈奇,李国彦. 双圆弧柔轮结构参数对柔轮应力的影响分析[J]. 机械传动, 2021, 45(1): 104-108. DOI: 10.16578/j.issn.1004.2539.2021.01.017 |
| |
| 作者姓名： | 马亮 武兵 沈奇 李国彦 |
| |
| 作者单位： | 太原理工大学 新型传感器与智能控制教育部和山西省重点实验室,山西 太原 030024;太原理工大学 新型传感器与智能控制教育部和山西省重点实验室,山西 太原 030024;太原理工大学 新型传感器与智能控制教育部和山西省重点实验室,山西 太原 030024;太原理工大学 新型传感器与智能控制教育部和山西省重点实验室,山西 太原 030024;电子科技大学 机械与电气工程学院,四川 成都 611731 |
| |
| 基金项目： | 国家自然科学基金(51805354)山西省应用基础研究计划(201901D211008)山西省回国留学人员科研资助项目(HGKY2019021) |
| |
| 摘 要： | 为了优化双圆弧谐波减速器中的柔轮结构,使用SoildWorks软件建立双圆弧齿廓的柔轮三维模型,利用有限元法模拟在装配条件下波发生器对柔轮的变形并建立了接触模型。针对柔轮轮齿上倒角的角度和薄壁圆筒壁厚等结构参数进行了优化,通过ANSYS Workbench对比分析了柔轮在空载和负载情况下,柔轮轮齿上最大等效应力和薄壁圆筒最大等效应力随柔轮结构参数的变化规律。研究为优化谐波减速器中柔轮的结构设计提供了依据,为空载和负载时柔轮的受力分布情况提供了参考。
|
| 关 键 词： | 谐波减速器 双圆弧柔轮 应力分析 有限元分析 |
Analysis of Influence of Double-arc Flexspline Parameter on Flexspline Stress |
| |
| Ma Liang,Wu Bing,Shen Qi,Li Guoyan. Analysis of Influence of Double-arc Flexspline Parameter on Flexspline Stress[J]. Journal of Mechanical Transmission, 2021, 45(1): 104-108. DOI: 10.16578/j.issn.1004.2539.2021.01.017 |
| |
| Authors: | Ma Liang Wu Bing Shen Qi Li Guoyan |
| |
| Affiliation: | (Key Laboratory of Advanced Transducers and Intelligent Control System of Ministry of Education and Shanxi Province,Taiyuan University of Technology,Taiyuan 030024,China;School of Mechanical and Electrical Engineering,University of Electronic Science and Technology of China,Chengdu 611731,China) |
| |
| Abstract: | In order to optimize the structure of the flexspline in the double-arc harmonic reducer,the three-dimensional model of the flexspline with double arc tooth profile is established by using the SoildWorks software,and the deformation of the flexspline by the wave generator under the assembly condition is simulated by using the finite element method and the contact model is established.According to the structural parameters of the flexspline,including the chamfer angle of the flexspline and the wall thickness of the thin-walled cylinder,the optimization is carried out,the change of the maximum equivalent stress on the teeth of the flexspline and the maximum equivalent stress of the thin-walled cylinder with the structural parameters of the flexspline are analyzed by the ANSYS Workbench.This study provides the basis for optimizing the structure design of the flexspline in the harmonic reducer,and provides the basic reference for the force distribution of the flexspline under no load and load. |
| |
| Keywords: | Harmonic drive Double-arc flexspline Stress analysis Finite element analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
