表层富立方相WC-TiC-Co功能梯度硬质合金

采用粉末冶金技术制备WC-15%TiC-6%Co硬质合金(质量分数), 通过控制氮气压力、固相烧结温度和烧结时间对合金进行渗氮烧结, 得到表层富立方相WC-TiC-Co功能梯度硬质合金。利用扫描电子显微镜、X射线衍射仪和能谱仪研究硬质合金梯度区域的微观组织、物相组成及元素分布。结果表明: 制备的WC-TiC-Co硬质合金梯度层厚度大于20 μm, 并且表层富含Ti元素和N元素, 其组成形式为Ti(C_0.7, N_0.3)。

Functionally graded cemented carbides of WC-TiC-Co with cubic rich surface

The WC-15%TiC-6%Co cemented carbides by mass were prepared by powder metallurgy, and the functionally graded cemented carbides of WC-TiC-Co with cubic rich surface were obtained by nitriding sintering in the control of nitrogen pressure, solid sintering temperature, and sintering time. The microstructures, phase constitution, and element distribution in graded zone of WC-Ti C-Co alloys were investigated by scanning electron microscopy(SEM), X-ray diffraction(XRD), and energy dispersive spectroscopy(EDS), respectively. The results show that, the graded layer of WC-TiC-Co alloys with cubic rich surface has a thickness of more than 20 μm, which is rich in titanium and nitrogen as a form of cubic Ti(C0.7,N0.3) phase.