| 切边圆盘剪设计 |
| |
| 引用本文： | 陶有能. 切边圆盘剪设计[J]. 华中科技大学学报(城市科学版), 2006, 23(Z2): 77-79 |
| |
| 作者姓名： | 陶有能 |
| |
| 作者单位： | 中冶南方工程技术有限公司,冷轧事业部,湖北,武汉,430080 |
| |
| 摘 要： | 从剪切机理、板带的剪切变形过程,分析计算圆盘剪剪切力和传动功率,介绍了圆盘剪开口度调整装置,剪刃侧间隙调整机构和重叠量调整机构以及侧间隙和重叠量对剪边质量的影响.
|
| 关 键 词： | 圆盘剪 剪切变形 切边质量 侧隙 |
| 文章编号： | 1672-7037(2006)S2-0077-03 |
| 修稿时间： | 2006-09-12 |
Design of Rotary Trimming Shears |
| |
| TAO You-neng. Design of Rotary Trimming Shears[J]. Journal of Huazhong University of Science and Technology, 2006, 23(Z2): 77-79 |
| |
| Authors: | TAO You-neng |
| |
| Abstract: | According to the trimming-mechanism and the trimming-deformation process of the strip,the trimming force and the driving power of rotary trimming shears are analyzed and calculated.The adjusting device of the joint opening is introduced,including the adjusting mechanism of the side play,the adjusting equipment of the overlap quantity and the effect of the latter on the trimming quality. |
| |
| Keywords: | rotary trimming shears process of the strip trimming quality side play |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
