| 挤压铸造对过共晶铝硅合金活塞各部位含硅量分布的影响 |
| |
| 引用本文： | 乐秀伟,韦吉华. 挤压铸造对过共晶铝硅合金活塞各部位含硅量分布的影响[J]. 车辆与动力技术, 1994, 0(2) |
| |
| 作者姓名： | 乐秀伟 韦吉华 |
| |
| 作者单位： | 北京理工大学!北京100081(乐秀伟)，江滨机械厂!湖南湘潭411102(韦吉华) |
| |
| 摘 要： | 挤压铸造成形的过共晶铝硅合金活塞不同部位的含硅量不同．经测定，活塞顶部和顶侧部的含硅量偏高，显微组织中初晶硅的数量也相应较多；销孔部位和裙部的含硅量偏低．这种情况，对活塞的使用是有利的，也进一步证明挤压铸造工艺的优越性．
|
| 关 键 词： | 过共晶铝硅合金 挤压铸造 活塞 含硅量 初晶硅 |
The Effect of Squeeze Casting on the Distribution of Silicon in Different Parts of a Piston Made of Hypereutectic Aluminum-Silicon Alloy |
| |
| Le Xiuwei. The Effect of Squeeze Casting on the Distribution of Silicon in Different Parts of a Piston Made of Hypereutectic Aluminum-Silicon Alloy[J]. Vehicle & Power Technology, 1994, 0(2) |
| |
| Authors: | Le Xiuwei |
| |
| Abstract: | The silicon content varies from part to part in sqeeze casting piston made of hypereutectic aluminum-silicon alloy.It was found that the content of Silicon on the top of a piston and the part around it is comparatively high.The amount of primary silicon in the microstructure is also correspondingly higher. But the silicon content near the pin hole and the skirt is relatively low. This kind of silicon distribution is advantageous to the use of the piston, which in turn shows the superiority of the squeeze casting technology |
| |
| Keywords: | hypereutectic aluminum-silicon alloy squeeze casting piston silicon content primary silicon |
| 本文献已被 CNKI 等数据库收录！ |
