| 基于MATLAB/Simulink高速滚珠丝杠进给系统机械模型的仿真与分析 |
| |
| 引用本文： | 姜鑫,王均馗.基于MATLAB/Simulink高速滚珠丝杠进给系统机械模型的仿真与分析[J].机械制造与自动化,2011(3):97-100. |
| |
| 作者姓名： | 姜鑫 王均馗 |
| |
| 作者单位： | 1. 陕西国防工业职业技术学院机电工程学院,陕西西安,710300
2. 哈尔滨电机厂交直流电机有限责任公司工艺部,黑龙江哈尔滨,150040 |
| |
| 摘 要： | 建立了高速滚珠丝杠进给系统的机械模型。重点分析机械系统对整个进给驱动系统的影响,并进行计算机仿真分析。通过实验数据分析掌握温度变化影响的效果。指出在高速加工过程中屈服形变引起的轨迹误差,并通过反复修改参数得到优化结果,并找出了进一步改进的措施。
|
| 关 键 词： | 高速 滚珠丝杠 进给驱动系统 |
Simulation and Experimental Analysis of High-Speed Ball Screw Feeder Drive System Mechanical Model Based on MATLAB/Simulink |
| |
| JIANG Xin,WANG Jun-kui.Simulation and Experimental Analysis of High-Speed Ball Screw Feeder Drive System Mechanical Model Based on MATLAB/Simulink[J].Machine Building & Automation,2011(3):97-100. |
| |
| Authors: | JIANG Xin WANG Jun-kui |
| |
| Affiliation: | JIANG Xin1,WANG Jun-kui2(1.Shaanxi Institute of Technology Electromechanical engineering college,Xi'an 710300,China,2.The Harbin-Electromotor Plant AC/DC Motor Co.,Ltd.,Technology Department,Haerbin 150040,China) |
| |
| Abstract: | This paper establishes the high-speed ball screw feeding system mechanical model to analyze the influence of the mechanical system on the whole drive system and use MATLAB computer to make the simulation analysis and research,points out the trajectory errors caused in the high-speed machining process yield deformation and finds out the further improvement measures through repeated optimizing the parameters. |
| |
| Keywords: | high speed ball screw drive system |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
