首页 | 本学科首页   官方微博 | 高级检索  
     

Mn,Cu掺杂对ZnS∶Mn,Cu电致发光材料亮度的影响
引用本文:刘东州,侯志青,宋建民. Mn,Cu掺杂对ZnS∶Mn,Cu电致发光材料亮度的影响[J]. 材料科学与工程学报, 2011, 0(1): 128-130
作者姓名:刘东州  侯志青  宋建民
作者单位:河北农业大学理学院
基金项目:河北农业大学非生命学科和新兴发展学科基金项目(FS200909);保定市科技局科研资助项目(09ZF072)
摘    要:采用水热法制备了ZnS∶Mn,Cu电致发光材料,利用透射电镜对发光材料的结构和形貌进行表征,并且探讨了Cu2+、Mn2+掺杂量和反应温度对ZnS∶Mn,Cu发光材料亮度的影响。结果显示,随着Cu2+、Mn2+掺杂量的增加,发光材料的亮度也随之增加,但对于Cu2+、Mn2+掺杂都存在最佳值,当Cu2+掺杂量0.2%,Mn2+掺杂量4%,温度150℃时,得到的电致发光材料亮度较高,粒径约10nm左右。

关 键 词:水热法  ZnS∶Mn,Cu  电致发光材料

Effects of Mn,Cu Doping on Brightness of ZnS:Mn,Cu Electroluminescent Material
LIU Dong-zhou,HOU Zhi-qing,SONG Jian-min. Effects of Mn,Cu Doping on Brightness of ZnS:Mn,Cu Electroluminescent Material[J]. Journal of Materials Science and Engineering, 2011, 0(1): 128-130
Authors:LIU Dong-zhou  HOU Zhi-qing  SONG Jian-min
Affiliation:(College of Science,Agricultural University of Hebei,Baoding 071001,China)
Abstract:The electroluminescent material of ZnS∶Mn,Cu was synthesized by hydrothermal method.The structure and feature of ZnS∶Mn,Cu were studied by transmission electron microscopy(TEM),the influences of Cu2+,Mn2+ doping and temperature on luminescence intensity were discussed as well.The results show that the material with the highest brightness is obtained at 150℃ and the doping dose of Mn2+ is 4%,Cu2+ is 0.2%,and the grain size is about 10nm.
Keywords:hydrothermal method  ZnS∶Mn,Cu  electroluminescent material
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号