首页 | 本学科首页   官方微博 | 高级检索  
     

氟改性环氧丙烯酸核壳乳液的合成及其涂膜性能
引用本文:陈美玲,李健,杨莉,刘桂林,高宏.氟改性环氧丙烯酸核壳乳液的合成及其涂膜性能[J].材料保护,2011,44(10):68-70,9.
作者姓名:陈美玲  李健  杨莉  刘桂林  高宏
作者单位:大连交通大学材料科学与工程学院无机超细粉体制备及应用辽宁省重点实验室,辽宁大连,116028
基金项目:辽宁省教育厅项目(2008S032)资助
摘    要:乳液是环保型低表面能海洋防污涂料的重要组分。采用核壳乳液聚合方法合成有机氟改性环氧丙烯酸乳液,探讨了软硬单体质量比、氟单体含量、环氧树脂含量对乳液性能的影响,得到氟改性环氧丙烯酸乳液的最佳配方,并探讨了合成乳液制备的涂料的海洋防污性能。结果表明:软硬单体质量比为1:1,丙烯酸含量为2%,单体核壳质量比为2:3,核玻璃转...

关 键 词:核壳乳液合成  氟改性环氧丙烯酸  附着力  接触角  抗冲击强度  吸水率

Synthesis of Organic Fluorine-Modified Epoxy Acrylate Emulsion and Evaluation of Performance of Its Paint
CHEN Mei-ling,LI Jian,YANG Li,LIU Gui-lin,GAO Hong.Synthesis of Organic Fluorine-Modified Epoxy Acrylate Emulsion and Evaluation of Performance of Its Paint[J].Journal of Materials Protection,2011,44(10):68-70,9.
Authors:CHEN Mei-ling  LI Jian  YANG Li  LIU Gui-lin  GAO Hong
Affiliation:(School of Materials Science and Engineering-Liaoning Key Laboratory of Inorganic Super-Fine Powders,Dalian Jiaotong University, Dalian 116028,China).
Abstract:Epoxy acrylate emulsion modified by organic fluorine was prepared by making use of core-shell emulsion polymerization method.The effects of mass ratio of soft and hard monomers, dosage of fluorine monomer,and dosage of epoxy resin on the properties of as-prepared emulsion were investigated.The optimized formulation for preparing the emulsion was established, and the marine anti-fouling performance of the paint made of the emulsion was primarily evaluated.Results indicate that the emulsion prepared at a mass ratio of soft and hard monomers of 1:1, acrylate dosage of 2%,monomer core-shell mass ratio of 2:3, core glass transition temperature of-10℃,organic fluorine monomer dosage of 8%(in relation to the total content of monomers), and epoxy resin dosage of 9%(in relation to the total content of monomers) possesses the optimal properties.The paint made of the emulsion possessing the optimal properties had a adhesion force of grade 2,water contact angle of 114.0°,anti-impact force of over 500 N·cm,and water absorption rate of 2.41%,showing desired anti-fouling performance in marine environment.
Keywords:core-shell emulsion polymerization  fluorine modified epoxy acrylic acid  adhesion force  contact angle  anti-impact force  water absorption rate
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号