| 67CrVA弹簧钢丝铅淬火显微组织研究 |
| |
| 引用本文： | 邢献强,杨振涛,陶善龙,王红祎. 67CrVA弹簧钢丝铅淬火显微组织研究[J]. 金属制品, 2002, 28(5): 13-16 |
| |
| 作者姓名： | 邢献强 杨振涛 陶善龙 王红祎 |
| |
| 作者单位： | 郑州金属制品研究院,450007 |
| |
| 基金项目： | 国家“8 63”计划新材料领域资助项目，合同号 :715— 0 12— 0 170。 |
| |
| 摘 要： | 采用TEM、SEM等分析仪器研究了 4 .5mm 6 7CrVA弹簧钢丝经 92 0℃ 3.15min奥氏体化后 ,在 5 0 0℃、5 4 0℃和 6 0 0℃的温度下铅浴处理 2min后的显微组织 ,指出 6 7CrVA弹簧钢丝在 5 4 0℃～ 5 6 0℃铅浴温度处理后断面收缩率出现低谷的原因是组织中条、块状铁素体周围分布着条状或链珠状渗碳体碳化物
|
| 关 键 词： | 67CrVA 弹簧钢丝 铅淬火 显微组织 研究 |
| 修稿时间： | 2002-07-23 |
Study of Patenting Microstructure of 67CrVA Spring Wire |
| |
| Xing Xianqiang,Yang Zhentao,Tao Shanlong,Wang Hongyi. Study of Patenting Microstructure of 67CrVA Spring Wire[J]. Steel Wire Products, 2002, 28(5): 13-16 |
| |
| Authors: | Xing Xianqiang Yang Zhentao Tao Shanlong Wang Hongyi |
| |
| Affiliation: | Zhengzhou Steel Wire Products Research Institute 450007 |
| |
| Abstract: | Adopting such analysis instrument as TEM and SEM to study the microstructure of 4.5?mm 67CrVA spring steel wire which is austenitized at 920?℃?for 3.15?min and is patented 2?min at 500?℃,540?℃and 600?℃respectively,it is pointed that the reduction of area of the wire appears a low valley when patented at 540～560?℃ because of stripe or chain pearl cementite carbide being around stripe and lump ferrite. |
| |
| Keywords: | CrVA spring steel wire patent microstructure study |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
