| 石灰粉煤灰稳定钢渣土路面设计参数研究 |
| |
| 引用本文： | 吴旻,王元纲,陈德鹏.石灰粉煤灰稳定钢渣土路面设计参数研究[J].徐州工程学院学报,2011(3):58-61. |
| |
| 作者姓名： | 吴旻 王元纲 陈德鹏 |
| |
| 作者单位： | [1]安徽工业大学建筑工程学院,安徽马鞍山243032 [2]南京林业大学土木工程学院,南京210037 |
| |
| 基金项目： | 住房和城乡建设部科学技术项目（2010-K4-27） |
| |
| 摘 要： | 通过室内试验测定不同配比的石灰粉煤灰稳定钢渣土的抗压回弹模量和劈裂强度,并采用路面设计软件BISAR分析底基层层底拉应力的变化规律.研究结果表明：配比中钢渣掺量为40%时的劈裂强度最高,配比中钢渣掺量为70%时的抗压回弹模量最高;随着钢渣掺量的增加,道路基层层底计算拉应力逐渐减小,底基层层底计算拉应力逐渐增大.路面结构设计中选择劈裂强度最高、抗压回弹模量适中的配比,取得较好的效果.
|
| 关 键 词： | 钢渣 道路工程 劈裂强度 抗压回弹模量 |
Research of Pavement Design Parameters of Lime-fly Ash Stabilization Soil Mixed with Steelmaking Slag |
| |
| WU Min,WANG Yuan-gang,CHEN De-peng.Research of Pavement Design Parameters of Lime-fly Ash Stabilization Soil Mixed with Steelmaking Slag[J].Journal of Xuzhou Istitute of Technology,2011(3):58-61. |
| |
| Authors: | WU Min WANG Yuan-gang CHEN De-peng |
| |
| Affiliation: | 1. School of Civil Engineering and Architecture, Anhui University of Technology, Maanshan 243002, China; 2. College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China) |
| |
| Abstract: | The modulus of compressive resilience and splitting strength of lime-ash soil mixed with steelmaking slag was studied through laboratory test. The change rule of tensile stress at the bottom of base and subbase was analyzed through Bisar software. When the steelmaking slag averages at 40% in the mixture, this formula had the highest splitting strength. When the steelmaking slag averages at about 70% in the mixture, this formula had the highest modulus of compressive resilience. The tensile stress at the bottom of base declines and the tensile stress at the bottom of subbase increases with steelmaking slag content increase in road pavement design. The mixture which had the highest splitting strength and appropriate modulus of compressive resilience could get better design effect. |
| |
| Keywords: | steel slag road engineering splitting strength modulus of compressive resilience |
| 本文献已被 维普 等数据库收录！ |
